Difference between revisions of "Bambi Wiki"

From Bambi
Jump to: navigation, search
(Mimmo)
(Simulation)
Line 41: Line 41:
  
 
== Simulation ==
 
== Simulation ==
#[[Integration between Gazebo and Ardupilot SITL]]
+
#[[Integration between Gazebo and PX4 SITL]]
 +
 
 
== Project Milestones ==
 
== Project Milestones ==
  

Revision as of 11:09, 4 August 2018

Welcome to the documentation Wiki of Bambi

An introduction needs still to be made. Some links to youtube videos of similar projects:

'

Project Requirements

TODO

Project Bias Point

The projects aims to develop an automated solution for the very specific use-case. The already developed and highly stressed concept of UVA is the starting point of the project. So we won't develop new techniques regarding these basic issues. Therefore we start with a DRONE that is able to:

  1. Hold a desired altitude
  2. Keep / fly to a desired GPS position
  3. Compensate external disturbances
  4. Provide ground communication for troubleshooting and development


To achieve this we use the following basic hardware:

  • Pixhawk with Arducopter (a featuring open source flight controller)
  • NEO-M8n (GPS)
  • 3DR telemetry radio 433Hz (to have a serial link to the ground station and communicate to the flight board trough Mavlink protocol)
  • Video TX Ts5823/5828 (300/600mW video transmitter 5.8GHz)
  • Video RX 5.8gHz av output or otg (uvc)
  • Sonar (WT81B003-0202 (Ultrasonic long distance sensor)) OBSELETEX

Mimmo

Meetings:

  1. 2017-07-04 Skype Call
  2. 2017-11-15 Meeting 1
  3. 2018-07-0x Meeting 2

Simulation

  1. Integration between Gazebo and PX4 SITL

Project Milestones

  1. Georeferenced Orthophoto
  2. Image Processing (obtain the contour of the field)
  3. Automated Flight Route Planner
  4. Obstacle Avoidance Flight Mode
  5. Thermal Camera Processing
  6. Bambi Saving Workflow (e.g. mobile apps)


Collection of related stuff that may be useful

Getting started with MediaWiki